Billet Performance Products 1JZ-GTE & 2JZ-GTE hall sensor kit is designed to replace the original reluctor sensors with hall sensors giving most aftermarket ECU's a cleaner signal.
We have found that this leads to less trigger errors, better EMI resistance and easier starting on most ECU's.
- Direct bolt on
- Deutsch DTM connectors (mating connectors also supplied)
- Designed to work with the stock 24 tooth and 36-2 (VVTi) trigger wheel and has been tested to 10,000rpm
Wiring Pinout
- Pin 1 - +Ve
- Pin 2 - Signal
- Pin 3 - Sensor Ground
Sensor ECU Setup
- Trigger Edge - Falling
- Pull up - Enabled
